Anton’s Plumbing & Gas is a family-owned company with more than 25 years of hands-on experience serving homes, rentals and businesses across Prospect. Our licensed team provides fixed-rate plumbing and gas services, same-day appointments and 24/7 emergency assistance.
From quick fixes to major repairs, discover why they trust us to handle their plumbing needs and how our commitment to quality and customer satisfaction makes us their top choice.
Get a clearer repair plan for plumbing problems at your Prospect property. Tell Anton’s whether you are dealing with a water-supply leak, poor drainage, a toilet fault or unreliable hot water. We can assess the affected system and explain the proposed work and access requirements.
Moisture around a fixture does not identify the cause by itself. Note whether it appears during use, continuously or after rain, and share photographs without opening walls or dismantling fittings. For a townhouse or rental, arrange the authorised contact before investigation and clarify whether access to shared areas may be required.
Choose the relevant service for Prospect: leak detection, drain assessment or hot water repairs. Related service-area pages include Blacktown, Seven Hills, Girraween. Contact Anton’s with the exact job address to confirm availability and charges.
Before approving work, ask about the findings, access limits and repair alternatives. The Service NSW licence check lets you check a tradesperson’s licence details. Keep inspection reports and repair records for any follow-up assessment.
Jet Blasting & CCTV Inspection
Fast fixed-price fixes
24/7 rapid response
Repair & install
Leaks & running cisterns
Non-invasive locating
Trenchless pipe repairs
Condition reports
Licensed gas work
We locate and clear blockages properly with CCTV drain cameras and high-pressure water jetting — not temporary quick fixes. Possible causes include tree roots, grease build-up, wipes or damaged pipework; a CCTV inspection helps identify what is actually blocking a drain.
For recurring blockages we’ll show you the camera footage and give straight advice on whether clearing, targeted repair or relining is the right long-term fix.
Burst pipe, gas smell or overflowing drain? Our 24/7 team gives Prospect priority response with fully stocked vans, so most emergencies are fixed on the first visit. You’ll get an upfront price before any work starts — even at 2am.
If water is flooding, turn off the supply at the meter first, then call us. If you smell gas, leave the building immediately and call 000 from outside. Avoid flames and electrical switches. Arrange a licensed inspection only after emergency services say it is safe.
No hot water this morning? We repair and replace storage tanks, continuous-flow and heat-pump systems, sized correctly for your household — with same-day changeovers available for most standard systems in Prospect.
Every install includes correctly rated tempering and pressure-control valves to current standards, so your system is safe as well as efficient.
Running cisterns, leaking bases and blocked toilets fixed fast — with parts carried on board for the most common systems. A constantly running toilet can waste hundreds of litres a day, so it pays to fix it early.
If a replacement makes more sense than a repair, we’ll quote both options so you can choose what’s right for your budget.
Unexplained water bills or damp patches? We use acoustic and thermal detection to pinpoint hidden leaks without pulling apart walls — then repair at the exact spot.
Every job is documented with photos and an itemised invoice, which supports insurance claims and gives you a clear record of the repair.
Repair cracked or root-damaged pipes without digging up driveways, paving or established gardens. We CCTV-assess the line, then install a structural liner rated for decades of service.
You receive the inspection footage and a written condition report — useful for insurance, strata records or simply peace of mind that the problem is properly fixed.
Licensed gas fitting for cooktops, heaters, BBQ points and hot water — including line sizing, pressure testing and compliance certificates for Prospect homes and businesses.
Smell gas? Leave the building immediately and call 000 from outside. Avoid flames and electrical switches. Once emergency services say it is safe, call us to arrange a licensed gas inspection and repair.
Roots can enter cracked or poorly joined drains and cause repeat blockages. CCTV inspection helps confirm whether they are involved.
Grease, food scraps and wipes are the leading cause of slow or blocked kitchen and laundry drains.
Most storage systems last 8–12 years. Rusty water or lukewarm showers usually mean it's time for an assessment.
Worn washers and cistern valves quietly waste water and inflate bills until they're repaired.
Braided hoses under sinks are a leading cause of indoor flooding — we inspect and replace them before they fail.
Leaves, silt and debris block outdoor drains during heavy rain, backing water up toward the house.
We are a local, family owned business dedicated to serving our community's plumbing needs in and around Sydney.
Our team is fully licensed and trained to meet industry standards while serving homes and businesses throughout Prospect.
Get a Free QuoteWe understand the urgency of plumbing and gas issues in Prospect and are committed to quick response times.
Get a Free QuoteNo hidden fees or surprise costs for our Prospect customers. We offer upfront quotes and flexible options.
Get a Free QuoteWe offer reliable same-day service across Prospect if you call before 10am.
Get a Free QuoteEnjoy total peace of mind knowing all our plumbing work in Prospect is backed by a Lifetime Labour Warranty.
Get a Free QuoteWith a commitment to quality and care, we ensure that every plumbing job in Prospect is done right the first time.
Get a Free QuoteTell us the issue and your Prospect address — we'll confirm a time window on the spot.
A local Prospect licensed plumber in a fully stocked van, on time, with everything to fix most jobs the first visit.
You approve the fixed price before work starts. Tidy site, itemised invoice, warranty on the work.
Straight answers on pricing, response times and what to expect.
Record whether moisture appears during fixture use, continuously or after rainfall. Describe the symptoms and choose from our plumbing services. The team can confirm the assessment scope, appointment and initial charges before attendance.
Note its location and timing, and photograph it from a safe position. Moisture may travel before appearing, so the visible patch is not proof of a pipe leak at that exact point.
Arrange access to the affected fixture and any relevant shared area. Provide the owner or strata contact, earlier reports and approval instructions; leave pipes and fittings intact for assessment.
Call 0493 824 176 with the address and fault to check availability. Explain any active water escape, wastewater overflow or loss of essential facilities. Confirm the attendance window; a same-day visit depends on scheduling, access and the service required.
If safely accessible and clearly identified, isolate the affected water supply and stop using the leaking fixture. Stay away from water near electrical equipment. Arrange burst-pipe assessment and explain whether the leak is contained; do not enter an unsafe area to reach a valve.
Stop using affected fixtures and keep people and pets away from wastewater. Several outlets may share a downstream restriction, but an inspection must establish the cause. Arrange drain assessment and follow Sydney Water’s blockage guidance for reporting an overflow.
CCTV inspection can help investigate repeat blockages or suspected pipe damage. Ask which pipe sections can be inspected and whether debris or standing water limits the view. Camera footage informs a repair decision; it does not itself repair the drain.
Relining may suit some damaged drains after their condition, alignment and access are assessed. It is not suitable for every collapse or inaccessible section. Request the inspection findings, preparation needed and alternatives before agreeing to work beneath a yard, driveway or building.
Leak detection starts with the symptoms and accessible inspection points. Note where moisture appears, when it changes and whether water usage has increased. The visible stain may be away from the source; do not open walls or disturb fittings before the assessment.
Provide the system type, accessible model label and whether every hot tap is affected. Our hot water service can assess repair or replacement options. For a shared system, identify the building contact; leave appliance covers, electrical components and gas controls alone.
Many faults can be assessed for repair, but condition and parts availability matter. Describe whether water appears at the spout, handle, connection or nearby surface. Arrange tap and fitting assessment before purchasing replacements for your Prospect property.
Report constant refilling, weak flushing, a rising pan or water around the base separately. A cistern fault is different from a drainage blockage. Our toilet repair service can assess the symptoms; stop repeated flushing if the pan is rising or overflowing.
Identify the appliance and supply type and confirm the appropriate licence for the work using the Service NSW licence check. Arrange gas fitting for installation or assessment. Treat a suspected leak as urgent: move away from the affected area and contact the gas emergency provider from a safe location.
Provide the person authorised to approve work and the occupant or keyholder who can arrange entry. Shared services may need building access and resident notifications. Clarify the scope and approval process before investigation starts.
Ask for the assessment or attendance charge, proposed work, parts, access assumptions and exclusions. Confirm any after-hours or call-out offer conditions. If investigation is needed first, establish when the findings and a repair price will be provided for approval.
Tell the team whether a device is already installed and provide earlier test records or a notice from the water provider. Backflow service requirements depend on the installation. Confirm the appropriate testing scope and credentials rather than assuming every property needs the same device or schedule.
Share plans, proposed fixture positions and any known drainage issues before ordering fittings. Existing connections and access can affect the work required. Confirm the plumbing scope and any required approvals with the relevant professionals; a routine repair quote is not a full renovation assessment.
Request written warranty terms for the specific work, including exclusions and any follow-up requirements. Keep the invoice, inspection findings and dates symptoms return. A new blockage or unrelated defect should be assessed rather than assumed to be covered by an earlier repair.
Related pages include Blacktown, Seven Hills, Girraween. Give the exact job address when contacting Anton’s so coverage, access and appointment availability can be confirmed.
Clear ordinary stored items from accessible work areas, keep earlier reports available and arrange a reachable decision-maker. Send the booking details before the visit. Leave flooded, confined or otherwise unsafe spaces untouched.
We're on the road across the region daily, so response times to Prospect stay short. We also service all neighbouring suburbs:
Tell us what's happening and we'll come back fast with a fixed price.
Don’t wait on a form, call now for 24/7 priority response.